Dixon® RST30 King™ Combination Nipple, 2-1/2 Inx5-9/16\" L Hose...

Dixon Valve & Coupling Company manufactures pipe and hose fittings and accessories. Dixon stainless steel hose barb and male NPT fitting for standard pipe, the hose fittings are compatible with low pressure rubber and elastomeric general service air and water hoses, low pressure hydraulic and contractor water hoses. This King combination nipple has a barbed end to create a tight seal on a hose when used with a hose clamp or crimp sleeve or ferrule (not included) and National Pipe Taper (NPT) male threads on the other to connect to NPT female connections. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. It is made of type 316 stainless steel for higher strength and greater corrosion resistance that type 304 stainless steel and is not recommended for steam applications. Gloxco Combination KC Nipple Fitting, 6″ Hose Shank X 6″ Male NPT Stainless Steel Kcn 600 Npt Ss 2d62b3ee 0b1b 495d Aa5b 4cc4c3cd77e5.1a86968ac36eafec6ae71f36155d4421 male NPT Barb length: 2.67 in. Not recommended for steam The use of an Air King safety clip or wire type retainer is necessary to ensure Air King universal couplings will not become accidentally disconnected. Gloxco Combination (KC) Nipple Fitting, 6u2033 Hose Shank x 6u2033 Male NPT... 3/4 Stainless Nipple Dixon® RST30 King™ Combination Nipple, 2-1/2 Inx5-9/16" L Hose... 4 Inch Suction Hose Connects to a hose on one end and an NPT female connector on the other Working pressure: 150 PSI maximum @ 72°F (22°C) 1 3/8 in. Consult Dixon for recommendations. In accordance with the R.M.A. bulletin for oil suction and discharge , a coupled length of in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement All standard hose fittings are intended for use with hose clamps or crimped ferrules . Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear.